18
©2016, Industrial Test Systems, Inc. Printed in USA
STANDARD STRIP METHOD
DIP STRIP AND PRESS READ
Press to initiate a 20 second countdown and
simultaneously DIP the eXact
®
strip by submerging
all pads in the sample. Use a gentle constant back
and forth motion (2 strokes per second) until the timer
displays
'1'
. Remove and discard the strip. Wait for
count-up time if required.
REMOVE STRIP
Remove one eXact
®
Strip Micro (e.g. Total Alkalinity) and
set in a dry, convenient place. Replace cap on bottle.
READ RESULTS
READ result displayed on the iDip
®
and in the app.
To run additional tests, repeat steps 5-9. To save,
send, and share results, proceed to page 22 prior
to closing the app.
TIP
On the Test Result Screen, swipe the result to the left,
or right, to view alternative units of measure.
Visit exactidip.com or exactidip570.com for complete test instructions.
To Next Page
Loading...
Need help?
General
