20
©2016, Industrial Test Systems, Inc. Printed in USA
AUTO-CALCULATED METHODS
MAGNESIUM HARDNESS
Perform tests for Total Hardness and Calcium
Hardness. Then, tap Results at the bottom of the page
and a Magnesium Hardness value will be calculated
automatically.
RESIDUAL ALKALINITY
Use the procedure above to obtain a Magnesium Hardness
value. Then use the STANDARD STRIP METHOD as illustrated
on page 18 to perform the test for Total Alkalinity. Lastly, tap
Results at the bottom of the page and a Residual Alkalinity
value will be calculated automatically.
SODIUM
Use the procedure above to obtain a Residual Alkalinity
value. Then use the STANDARD STRIP METHOD as illustrated
on page 18 to perform tests for Chloride and Sulfate. Lastly,
tap Results at the bottom of the page and a Sodium value
will be calculated automatically.
If you would like to obtain all three test results listed above,
you can perform all required tests (Total Hardness, Calcium
Hardness, Total Alkalinity, Chloride, and Sulfate) and then go
to Results. At this point, all three values will be automatically
calculated simultaneously (see below).
Visit exactidip.com or exactidip570.com for complete test instructions.
To Next Page
Loading...
Need help?
General
