21
exactidip.com
LANGELIER SATURATION INDEX (LSI)
Use the STANDARD STRIP METHOD as illustrated on page 18
to perform tests for Total Alkalinity, Calcium Hardness, and
pH. Then, obtain a TDS result and a Temperature result via
alternate means. Open the slide-out menu and tap Manual
Test. Tap Temperature and enter the value obtained. Tap
Save in the top left. Tap Total Dissolved Solids (TDS) and
enter the value obtained. Tap Save in the top left. Lastly, tap
Results at the bottom of the page and an LSI value will be
calculated automatically.
TOTAL CHLORINE
Perform the NON-STANDARD METHOD for Combined Chlorine
(available for download at exactidip.com). Lastly, tap
Results at the bottom of the page and a Total Chlorine value
will be calculated automatically.
COMBINED CHLORINE
Use the STANDARD STRIP METHOD as illustrated on page 18
to perform tests for Free Chlorine and Total Chlorine. Then,
tap Results at the bottom of the page and a Combined
Chlorine value will be calculated automatically.
MANUAL ENTRY
This feature allows you to utilize other testing methods and
manually enter your results into the app. Begin by selecting
'Test', 'Manual Entry', select your desired test. Enter the value
obtained. Once fi nished, tap 'SAVE' at the top left. If the test
you need to enter is not available on the list, tap 'Custom*'.
Enter the type of test that was run, the value obtained, and the
unit of measure used. Then, tap 'SAVE' at the top left.
AUTO-CALCULATED METHODS
Visit exactidip.com or exactidip570.com for complete test instructions.
To Next Page
Loading...
Need help?
General
