17
Sensafe.com
CYANURIC ACID
SHAKE BOTTLE & ADD DROPS
Tilt the meter to discard about 0.2mL water to leave
room for liquid reagent. Shake the bottle of eXact
®
Reagent CY to mix the suspension in the bottle. Add
5 drops of the eXact
®
Reagent CY to the sample cell.
Keep reagent bottle vertical while adding drops.
5
READ RESULTS
READ result displayed as Cyanuric Acid. This result is
automatically stored in the CY6 menu. After testing is
complete, rinse the sample cell immediately.
7
FILL, DIP, READ
CAP & PRESS READ
Place the cell cover onto the sample cell. Press
to initiate a 20 second countdown. Place thumb or
fi nger over cap, and mix the sample by turning the
meter upside-down repetitively during the 20 second
countdown. When timer displays 1, place the meter on a
fl at surface (upright). The display will automatically start
to count up for 60 seconds.
6
To Next Page
Loading...
