16
©2016, Industrial Test Systems, Inc. Printed in USA
CYANURIC ACID
1
POWER ON PHOTOMETER
Press the button to power on the Pool eXact
®
EZ.
3
SELECT TEST
Press and re-press the button until the
display shows CY6.
ZERO METER
Place cell cover on sample cell before zeroing.
Press and the LCD Display reads 0
PPM
,
indicating the meter is ready for testing.
4
FILL, DIP, READ
FILL CELL
Rinse the cell 3 times with the water sample to
be tested and
FILL to the top to begin test.
2
Use the included cleaning brush to clean the cell before/
after each test to prevent reagent interferences and
achieve the most accurate result.
TIP
To Next Page
Loading...
