19
Sensafe.com
COPPER
REMOVE STRIP
Remove one eXact
®
Strip Micro CU Copper and set in a
dry, convenient place. Replace cap on bottle
5
DIP STRIP AND PRESS READ
Press to initiate a 20 second countdown and
simultaneously DIP the eXact
®
Strip by submerging all
pads in the sample then use a gentle, constant, back
and forth motion (2 strokes per second) until the timer
displays
‘1’
. Remove and discard the strip. The display
will automatically start to count up for 120 seconds.
6
READ RESULTS
READ result displayed as Copper. This result is
automatically stored in the CU7 menu. After testing is
complete, rinse the sample cell immediately.
7
FILL, DIP, READ
To Next Page
Loading...
