200 - 23
© 1997 EXECUTONE
®
Information Systems, Inc.
Medley™
User Operation
2.6 ExecuDex
ExecuDex is an optional electronic address book that lets you store up to 100 caller ID
names and numbers for auto dial. For you to have ExecuDex, your system must have caller
ID and you must have the ExecuDex programmable key.
Storing an Incoming Call in ExecuDex
The ExecuDex key allows you to store up to 100 caller ID names and numbers.
• With the caller ID name appearing in the LCD display, press the ExecuDex key.
The name and number are stored.
Auto Dialing with ExecuDex
NOTE: Some local calls might not be dialed correctly depending on the limitations of the
local dialing plan. You might need to dial these calls manually.
1. While your phone is idle, press the ExecuDex programmable key.
2. Repeatedly press the dial-pad key corresponding to the first letter of the name
until the desired name and number appear.
A name that starts with Q or Z is retrieved by using
. Press # instead of a letter
key to scroll through all stored names.
3. Press the CALL soft key to auto dial the number.
Deleting Names from ExecuDex
1. Select the name (using the preceding procedure).
2. Press the DEL soft key.
Example: While on a call from Baker Electronics, Baker Electronics appears in
your display. You can save the name and number by pressing the programmed
ExecuDex key. Your display confirms that the information has been stored. To
Call Baker Electronics, press the ExecuDex key, then
key (corresponding to
ABC). The display shows the first stored name that starts with A, B, or C. Press
again until Baker Electronics appears. Press the CALL soft key, and the
number is auto dialed.
To Next Page
Loading...