Executone Systems 84600 - Placing Calls; Placing an Outside Call; Placing an Intercom (ICM) Call

200 - 8
© 1997 EXECUTONE
®
Information Systems, Inc.
Medley™
User Operation
Placing Calls
You can place both outside calls and intercom (ICM) calls. ICM calls are calls to exten-
sions in your telephone system. The next two topics explain how to place calls.
Placing an Outside Call
1. Lift the handset.
OR
Press the HF key.
OR
Dial 9.
Note that if you hear an outside dial tone, your phone has the outside dial tone
preference enabled, and you must skip to step 3.
2. If you do not yet have an outside dial tone:
• Dial 9 (or 8 or 7).
OR
• If your station has been programmed to provide line keys, press an unlit line
key.
3. Dial the number.
Placing an Intercom (ICM) Call
The first procedure is for telephones that do not have outside dial tone preference en-
abled. The second procedure is for those that do.
For telephones that do not have outside dial tone preference
enabled:
• With or without first lifting the handset, press a station key or dial the extension
number.
If you did not lift the handset, the call connects through the telephone’s hands-
free speaker.
For telephones that have outside dial tone preference enabled:
• Press MORE (F2). Then press the ICM soft key. Then lift the handset or press
HF.
OR
With or without first lifting the handset, press a station key.
If you did not lift the handset, the call connects through the telephone’s hands-
free speaker.