Exerpeutic 475SL - Installing the Backrest

13
ASSEMBLY
Step 4
Installing the Backrest:
Warning: The Socket Head Bolts (28) should be installed from the inside as shown in the
illustration above.
4A. Attach the Backrest (1) onto the Left and Right Pivot Arm (10L, 10R) by aligning the
holes of the Left and Right Pivot Arm (10L, 10R) with the brackets of the Backrest (1).
Secure with five Socket Head Bolts (28), five Flat Washers (19) and five Nylon Nuts (42).
Tighten the hardware with the 6mm Allen wrench and the 10, 13, 17 mm Wrench provided.
Hardware:
(28) Socket Hex Bolt
5PCS
(19) Flat Washer
5PCS
(42) Nylon Nut
5PCS
Tools:
6mm Allen Wrench 1PC
10, 13,17mm Wrench 1PC