24
For your convenience, the bike can be folded up for storage when NOT in use.
1. Angle the Desk (88) to its lowest position. Refer to the Operations & Adjustments Page 22.
2. Slide the Desk (88) to its furthest forward position.
3. Remove the Safety Pin (22).
4. Push the Rear and Front Frames (1, 2) together.
5. Swing the Backrest (49) down flat against the Desk (88).
6. Align the Storage pin holes on the Rear and Front Frames (1, 2), and insert the Safety Pin
(22) into the lower pin hole to keep both sides of the frame in place.
7. Attach the Rear Frame Support Tube (67) onto the Tube Clip (113).
To Next Page