Need help?Do you have a question about the EXFO Fiber Guardian FG-750 and is the answer not in the manual?
General| Type | OTDR |
|---|---|
| Battery Life | 8 hours |
| Event Dead Zone | 0.8 m |
| Attenuation Dead Zone | 4 m |
| Fiber Type | Single-mode |
| Power Measurement Accuracy | ±0.5 dB |
| Wavelength | 1310 nm, 1550 nm |
| Resolution | 0.05 m |
| Display | 7-inch touchscreen |
| Connectivity | Ethernet, USB |
| Operating Temperature | -10°C to +50°C |
| Storage Temperature | -40°C to +70°C |
| Power Supply | AC adapter |
Covers essential safety practices and warnings for operating the unit.
Explains various safety symbols found on the equipment.
Details laser safety precautions, warnings, and guidelines for OTDR units.
Provides critical safety information related to electrical connections and hazards.
Highlights the key features and capabilities of the FG-750 Fiber Guardian.
Lists and describes the different FG-750 models available to suit various needs.
Explains the various configurations for optical switch cassettes in the FG-750.
Details the unit's power sources, including replaceable modules and battery backup.
Lists the web browsers compatible with the FG-750's user interfaces.
Guides on building custom test applications using provided REST commands.
Provides information on how to find the product's technical specifications.
Explains the usage conventions and symbols used throughout the user guide.
Essential steps to prevent damage to the unit from electrostatic discharge.
Key considerations and preparations required before installing the unit.
Step-by-step guide for securely installing the FG-750 unit into a rack.
Instructions for correctly grounding the unit to prevent electrical hazards.
Procedures for safely installing and removing optical switch cassettes from the unit.
Details on installing and using the optional fiber management tray.
Guide on connecting power supplies and network cables to the unit.
Instructions for powering the FG-750 unit on and off.
How to connect external monitoring devices to the unit's dry contact relays.
Procedures for connecting external switches to expand port capacity.
Steps to find and record the unit's IP addresses for network access.
Instructions for configuring the unit for wireless 3G/4G network access.
Guide on establishing a VPN connection for remote access to the unit.
Information on using REST commands for system-level network test and management.
How to operate the RTU remotely using SMS commands.
Steps to install the Notification Agent application on a computer.
Guide on setting up remote access to the unit over WAN or Internet.
Overview of applications, user accounts, and default credentials for accessing the unit.
Introduces the Fiber console module for Identity and Access Management.
Steps to access the system's administration console for user management.
Explains how realms manage users, credentials, roles, and groups.
Details how roles are configured to define user types and permissions.
Procedures for searching, creating, and managing user accounts.
How to manage groups of users and their inherited attributes.
Information on federating external user databases like LDAP and Active Directory.
Comprehensive guide on how to access and log out of the Host Web UI.
How to view system status, network adapter configurations, and serial numbers.
Steps to configure host and companion network settings like hostname and IP addresses.
Guide on setting up 3G/4G wireless network parameters for remote access.
How to configure the unit to connect as an NQMSfiber EMS client.
Steps to configure the unit's email server settings for alerts.
Information on configuring SNMP settings for network management.
How to set up time server synchronization for accurate timekeeping.
Procedure for detecting and identifying connected optical fibers and ports.
Steps for reassigning optical routes when a cassette is changed.
Guide on configuring remote switches (ROTAU) for port management.
Explains how to interpret the status of ROTAU devices (Operational, Unreachable, Decoupled).
How to set up and configure alerts for various fault conditions via email or SNMP.
Describes how to create, modify, and delete alert types for notifications.
How to manage default values for optical routes, test setups, and system parameters.
Guide on editing default parameters for on-demand testing.
How to view, modify, duplicate, and delete optical routes.
Detailed guide on defining test setups, parameters, and analysis thresholds.
How to view, add, modify, and delete test programs for scheduled tests.
Procedures for creating, modifying, and deleting threshold sets for fault detection.
Guide on conducting manual, on-demand OTDR tests with selected parameters.
How to perform tests on optical routes using predefined test setups.
Explains the degraded fiber handling strategy for capturing unstable fiber conditions.
How to view the status of ongoing, scheduled, and on-demand tests.
Steps to install and configure the Notification Agent for monitoring RTUs.
How to define and manage cable templates for testing multiple fibers with same parameters.
How to view, export, and clear the list of detected faults.
Guide to performing complementary analysis using the Trace Viewer.
How to search, view, and save OTDR results and trace data.
Specific instructions for viewing search results of on-demand tests.
Steps to access the Line Configuration Web UI for managing test lines.
Procedures for adding, editing, and deleting remote OTAUs (external switches).
How to add, edit, and delete lines and manage ports.
Guide on performing injection loss tests to verify switch connections.
How to export, save, import, and load configuration files.
How to view and refresh the system event log.
Steps to customize the event log display by showing or hiding columns.
How to apply and clear filters to refine the event log view.
Guide on exporting log reports in XML format.
Detailed procedure for cleaning switchable optical connectors.
Instructions for cleaning EUI connectors to maintain performance.
Guide on cleaning various types of connectors using mechanical cleaners.
Steps for replacing the unit's air filter to maintain optimal temperature.
Procedures for safely replacing the unit's internal fan.
Instructions for replacing AC or DC power supply modules.
Step-by-step guide for replacing the OTDR module.
Procedures for replacing an RTU or changing the SSD when managed by EMS.
How to back up the unit's database for system security.
How to view a list of installed applications and their versions.
How to retrieve the firmware version of the unit's companion.
Procedures for adding, modifying, or deleting software packages.
Information on unit calibration standards and recommended intervals.
Guidelines for proper recycling and disposal of the product.
Common issues and their troubleshooting solutions.
Explains the meaning and possible solutions for unit LED status indicators.
How to view the current status of the host, companion, and system.
Procedures for testing the status of power, system, and user-defined relays.
How to refresh the status of unit LEDs after resolving issues.
Guide on connecting to the unit via KVM remote console for advanced tasks.
Steps to reset the unit's configuration to factory default values.
How to restore the unit to normal operation using Windows 8 recovery tools.
How to restore the unit to normal operation using Windows 10 recovery tools.
How to access the user guide and other documentation online.
Contact information and procedures for obtaining technical support.
How to view EXFO contact information for assistance.
Recommendations for safely transporting the unit to minimize damage.
Details the equipment warranty against defects and applicable specifications.
Excludes EXFO's liability for damages arising from product usage or modifications.
Lists conditions and factors excluded from the product warranty.
States that the equipment met published specifications at shipment.
Information on product service and repair policies, including RMA procedures.
Lists authorized EXFO service centers for product servicing.
To Next Page
