What to do if I cannot analyze an image with EXFO Analytical Instruments?
If you cannot analyze an image, ensure the image is properly focused by using the focus knob on the probe until the focus indicator displays an acceptable (yellow) or preferred (green) range. Also, make sure the probe is properly connected, the connector is correctly aligned, the focus value is sufficient for analysis, and you are using a high magnitude level.
What to do if the auto centering does not function properly on EXFO Analytical Instruments?
If the auto centering isn't working right, try cleaning the connector. You may also need to adjust the image focus.
Why I cannot see the fiber on-screen using EXFO Analytical Instruments?
If you cannot see the fiber on-screen, first connect the probe to the USB port of the unit. Next, verify the probe connection status to see if ConnectorMax2 is detecting the probe properly. If connected properly, try closing and reopening ConnectorMax2. If you're using an FTB-500, ensure the probe is connected to the lower USB port in front of the unit.
What to do if the FIP internal temperature is too high in EXFO Analytical Instruments?
If the FIP internal temperature is too high, let the FIP cool down.
What to do if I cannot analyze an image on my EXFO Test Equipment?
If you cannot analyze an image, it may be due to the image not being focused properly. Use the focus knob on the probe until the focus indicator displays the best value available. Also, ensure that the connector is aligned properly, the focus value is sufficient, and you are using a high magnitude level.
What to do if the auto centering does not function properly on my EXFO Test Equipment?
If the auto centering does not function properly, the solution is to clean the connector and adjust the image focus.
What to do if a connection error occurred with my EXFO Test Equipment?
If a connection error occurred, ensure that the probe is not currently in use by another application. If not, try to connect the probe again.
Why I cannot see the fiber on-screen of my EXFO Test Equipment?
If you cannot see the fiber on-screen, verify the probe connection status to see if ConnectorMax2 Mobile is detecting the probe properly. Also, ensure that the Wi-Fi and the probe are on.
General| Power Measurement Range | Not applicable |
|---|---|
| Power Accuracy | Not applicable |
| Wavelength Accuracy | Not applicable |
| Type | Fiber Inspection Probe |
| Connector Types Supported | LC, SC, ST, MPO |
| Display | Color LCD |
| Connectivity | Wi-Fi |
| Power Source | Rechargeable Lithium-ion battery |
| Wavelength Range | Not applicable (fiber inspection, not power measurement) |
| Operating Temperature | 0°C to 40 °C |
| Storage Temperature | -20 °C to 60 °C |
| Weight | 300 g |
Regulatory compliance statement for Canada and the USA.
EU conformity declaration for radio equipment, including frequency bands.
Technical parameters and conformity mark for Japan.
Details on the FIP-400B probe, its models, technical specs, and conventions.
Information on interchangeable probe tips and the meaning of LED indicators.
Overview of the ConnectorMax2 Mobile application for fiber inspections.
Essential warnings and precautions for operating the fiber inspection probe.
Explains various safety symbols found on the unit.
Guidelines for electrical safety, operating temperatures, and equipment ratings.
Steps to install the app and connect the wireless probe via Wi-Fi.
Instructions for changing inspection tips and MF-Ready probe nozzles.
How to adjust the display brightness in the mobile application.
Customizing test identification fields and file naming conventions.
Enabling the automatic capture feature for FIP-435B probes.
Selecting, importing, deleting, and hiding test configurations and modifying file formats.
Configuring early analysis stop for multifiber and restoring app to default settings.
Detailed steps for inspecting single fiber ends using Live Video mode.
Procedures for inspecting multifiber connectors with MF-Ready probes.
How to save, open, and delete captured inspection files.
Interpreting analysis results, overlays, and generating reports.
Sharing data via third-party apps, direct transfer, and firmware updates.
Guidelines for general care, cleaning lenses, and unit maintenance.
Information on proper recycling and disposal of the unit.
Procedures for recharging and replacing the probe's battery.
Table of common issues, their causes, and solutions.
How to contact EXFO support, view app info, online help, and transportation advice.
Details on warranty coverage, exclusions, and conditions.
Procedures for sending equipment for service, repair, or calibration.
Contact information for EXFO's global service centers.
Steps to manually adjust focus for specific probe tips.
To Next Page
