Fiber Inspection Probe 59
4 Inspecting Fiber Ends
Viewing the fiber inspection is done using ConnectorMax2 Mobile. You can
start the application before or after connecting the probe, and the view
on-screen will be automatically updated.
Inspecting Fiber Ends (Single Fiber and
Transceiver - Fiber Receptacles)
When you connect the FIP-400B Fiber Inspection Probe to your smart
device, you can view and inspect fiber ends right away. This direct viewing
mode is known as the Live Video mode.
Note: When the internal temperature of the FIP-435B is too low, the probe
performs a warmup that can last up to a minute.
Note:
A digital watermark is added to the images generated by the application.
WARNING
Never look directly into a live fiber. It could cause serious eye
damage. Always use your FIP-400B Fiber Inspection Probe.
To Next Page
Loading...
