Maintenance
102 FIP-400B
Cleaning Lenses
Cleaning Lenses
Lenses are part of the Fiber Inspection Probe. To help you with the cleaning
process:
With a filtered air blower or a soft bristled brush, remove as much dust
and dirt as possible.
Apply a few drops of cleaning solution, which is used to clean camera
lenses, on a lens tissue, a cleaning cloth or a cotton swab. The lens
cleaning solution especially manufactured by camera lens
manufacturers can be used safely. Reagent grade isopropyl alcohol as
well as deionized water can also be used safely.
Gently remove oil, fingerprints and grime from the lens surface, using a
circular motion from the center outwards.
Recycling and Disposal
For complete recycling/disposal information, visit the EXFO Web site at
www.exfo.com/recycle.
To Next Page
Loading...
