Fiber Inspection Probe 1
1 Introducing the FIP-400B Fiber
Inspection Probe and
ConnectorMax2 Mobile
The FIP-400B Fiber Inspection Probe is a portable video microscope used
to inspect fiber ends. Unlike traditional microscopes, the FIP-400B
facilitates the examination of patchcord connectors and also hard-to-reach
connectors on the back of patch panels and bulkhead adapters.
There are two different types of probes:
USB-wired probes, that are connected to platforms
wireless probes, that can be connected with a Wi-Fi or USB connection
to platforms or with a Wi-Fi connection to a mobile smart device
(Android or iOS)
standard wireless probes can inspect single fibers and transceivers
MF-Ready probes can inspect single fibers, transceivers and
multifiber connectors (mobile smart devices only)
Note: The appearance and the orientation (portrait or landscape) of the
application may vary depending on the smart device used.
To Next Page
Loading...
