Setting up Your Fiber Inspection Probe and ConnectorMax2 Mobile
Fiber Inspection Probe 55
Stopping the Analysis Process on First Fail
Stopping the Analysis Process on First Fail
When inspecting multifiber connectors with an MF-Ready probe, you can
choose to stop the analysis process as soon as the application detects a fail
status on a fiber. This feature is particularly useful when many fibers need
to be tested in the connector because you do not have to wait for the
analysis process to complete and you can clean the connector end right
away.
To stop the analysis process on the first fail:
1. From the main window, tap .
2. Select Application Settings.
To Next Page
Loading...
