Maintenance
104 FIP-400B
Replacing the Battery (FIP-425B and FIP-435 Models Only)
Replacing the Battery (FIP-425B and FIP-435
Models Only)
Your probe is powered by a Li-ion polymer rechargeable battery.
WARNING
Your unit uses a three-cell battery that has been especially
designed for EXFO. For this reason, you can only replace it with
a battery of the same type and model. The use of other
batteries may damage your unit and compromise your safety.
Battery replacement should only be done by a qualified
technician with the appropriate tools on an electronic bench or
similar environment.
Do not throw the battery into fire or water and do not
short-circuit the battery electrical contacts. Do not disassemble.
CAUTION
To avoid irremediable damage to the battery, always remove the
battery compartment door carefully, ensuring that the battery does
not fall.
To Next Page
Loading...
