Inspecting Fiber Ends
Fiber Inspection Probe 93
Transferring Results With Third-Party Applications
Transferring Results With Third-Party
Applications
Third-party applications are useful when you want to share measurement
files with other users. The data that can be shared are measurement files
(.cmax2) and images (.png).
By default, you will be prompted to select the application with which you
want to work.
It is possible to share the FIP measurements as soon as the result of the
analysis is displayed on screen and in Archive mode only. The Live Video
mode does not allow it.
You need to disconnect the probe first if you want to share data with the
smart device. Otherwise, the application buffers the FIP measurements.
When an image (.png) is send by e-mail, the e-mail is already
pre-formatted with a summary of the information concerning the capture
made. Information such as the file name and the inspection result is
displayed.
Measurement files (.cmax2) and images (.png) can also be sent via SMS.
IMPORTANT
If you want to transfer results with a third-party application, ensure
you first follow the steps related to the sharing process of the
application you want to use, such as creating an account.
To Next Page
Loading...
