EasyManuals Logo

Exmark Laser Z User Manual

Exmark Laser Z
70 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
- 6 -
1.5.4 Store fuel in a container specifically designed for this purpose in a cool, dry place.
1.5.5 Keep the mower and fuel container in locked storage to prevent children from
playing or tampering with them.
1.5.6 Gasoline powered equipment or fuel containers should not be stored in a basement
or any enclosed area where open pilot lights or heat appliances are present.
1.5.7 Maximum mowing results and safety can only be achieved if the mower is
properly maintained and operated correctly.
1.5.8 Check all bolts frequently to maintain proper tightness.
1.5.9 Keep all guards, shields and all safety devices in place and in safe working
condition.
1.5.10 Frequently check for worn or deteriorating components that could create a hazard.
1.5.11 All replacement parts must be the same as or equivalent to the parts supplied as
original equipment.
WARNING
POTENTIAL HAZARD
Hydraulic fluid escaping under pressure can penetrate
skin and cause injury.
WHAT CAN HAPPEN
Fluid accidentally injected into the skin must be
surgically removed within a few hours by a doctor
familiar with this form of injury or gangrene may result.
HOW TO AVOID THE HAZARD
Make sure all hydraulic fluid hoses and lines are in
good condition an all hydraulic connections and fittings
are tight before applying pressure to hydraulic system.
Keep body and hands away from pinhole leaks or
nozzles that eject high pressure hydraulic fluid.
Use cardboard or paper to find hydraulic leaks.
Safely relieve all pressure in the hydraulic system
before performing any work on the hydraulic system.
For Kawasaki Liquid-Cooled units:
WARNING
POTENTIAL HAZARD
Engine coolant is hot and pressurized.
Radiator and surrounding parts are hot.
WHAT CAN HAPPEN
Spray or steam from hot, pressurized liquid in the
engine cooling system and touching a hot radiator
may cause severe burns.
HOW TO AVOID THE HAZARD
Allow the engine to cool completely before removing
the radiator cap or servicing any component of the
cooling system.

Other manuals for Exmark Laser Z

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Exmark Laser Z and is the answer not in the manual?

Exmark Laser Z Specifications

General IconGeneral
BrandExmark
ModelLaser Z
CategoryLawn Mower
LanguageEnglish

Related product manuals