To Next PageTo Next PageWhy is my Exmark Lazer Z XS engine overheating?
If your Exmark Lawn Mower is overheating, it could be due to several reasons. First, try reducing the ground speed to decrease the engine load. Check the oil level in the crankcase and add oil if necessary. Also, make sure the cooling fins and air passages for the engine are free from any obstructions. Remove any debris to ensure proper airflow.
What to do if my Exmark Lazer Z XS Lawn Mower machine does not drive?
If your Exmark Lawn Mower isn't driving, check that the bypass valve is closed tightly. A worn, loose, or broken drive or pump belt can also be the culprit, so replace the belt. Ensure the drive or pump belt hasn't come off a pulley, and if it has, change the belt. Look for a broken or missing idler spring and replace it if necessary. Finally, check the hydraulic fluid level; if it's low, add hydraulic fluid to the reservoir, or if it's too hot, let it cool down.
Why does the warning buzzer emit a continuous beep on my Exmark Lawn Mower?
If the warning buzzer on your Exmark Lawn Mower emits a continuous beep, it could indicate a few issues. The temperature may be increasing on the coolant temperature gauge, so turn the unit off and allow the engine and components to cool. Check the coolant level and add coolant if it's low. Also, inspect the radiator for debris and remove it. If the water pump or alternator belt is worn, loose, or broken, contact Authorized Service Dealer.
General| Brand | Exmark |
|---|---|
| Model | Lazer Z XS |
| Category | Lawn Mower |
| Language | English |
