EasyManua.ls Logo

Exmark Lazer ZXS User Manual

Exmark Lazer ZXS
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
For Serial Nos.
600,000 & Higher
Part No. 103-9911 Rev. A
Question and Answer IconNeed help?

Do you have a question about the Exmark Lazer ZXS and is the answer not in the manual?

Exmark Lazer ZXS Specifications

General IconGeneral
Turning RadiusZero-turn
EngineKawasaki, Kohler
Deck TypeFabricated
Warranty3-year limited
Engine Type4-cycle
Engine BrandKawasaki, Kohler
Cutting Width60-72 inches

Summary

Safety

Training

Emphasizes operator training and proper use of equipment.

Preparation

Outlines steps and precautions before operating the mower.

Operation

Maintenance and Storage

Specifications

Safety Interlock System

Explains the conditions required to start the engine.

Operation Instructions

Controls Overview

Introduces the controls and their functions.

Control Operations

Operator Presence Control (OPC) Levers

Explains the function of OPC levers for safety.

Drive Levers

Details the operation of drive levers for traction and braking.

Neutral Lock/Park Brake Latches

Describes how to engage neutral lock and park brake.

Pre-Start Procedures

Operating Instructions

Starting the Engine

Step-by-step guide for starting the engine.

Stopping the Engine

Instructions for properly stopping the engine.

Drive Lever and Latch Operation

Detailed operation of drive levers and latches.

Unit Operations

Drive Wheel Engagement and Turning

How to engage drive wheels and perform turns.

Stopping the Unit Safely

Procedure for safely stopping the unit.

PTO Engagement

Instructions for engaging the Power Take-Off (PTO).

Transporting

Maintenance & Adjustments

Periodic Maintenance

Overview of regular maintenance tasks.

Periodic Maintenance Checks

Check Engine Oil Level

Procedure for checking and topping up engine oil.

Check Safety Interlock System

Procedure for verifying the safety interlock system.

Linkage Adjustments

Brake and Wheel Drive Linkage Adjustment

How to adjust brake and drive linkages.

Routine Maintenance Tasks

Change Engine Oil

Instructions for changing the engine oil.

Adjustments

Adjusting Cutting Height with Blade Spacers

How to adjust cutting height using blade spacers.

Axle and Caster Adjustments

Axle Height and Caster Position Adjustment

Adjusting rear axle and caster for cutting height.

Belt Adjustments

Blade Brake Adjustment

Blade Brake Adjustment Procedure

Procedure for adjusting the blade brake.

Lever and Guide Adjustments

Trouble Shooting

Common Mowing Issues

Engine Will Not Start

Common causes and solutions for engine start failure.

Warranty Information

Evaporative Emission Control Warranty

Related product manuals