EasyManua.ls Logo

Exmark Quest QST24BE522 - Page 13

Exmark Quest QST24BE522
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
A
B
B
C
F
E
D
1
3
4
2
6
5
7
1. Warning—read the Operator’s Manual.
2. Read the instructions before servicing or
performing maintenance; apply parking
brake, remove the ignition key and
disconnect the spark plug wire.
3. Thrown object hazard – keep bystanders
a safe distance from the machine, pick up
debris before operating, keep the
discharge deflector in place.
4. Loss of traction/control hazard, slopes –
loss of traction/control on slope,
disengage the blade control switch (PTO),
proceed off the slope slowly.
5. Tipping hazard – avoid sud den and sharp
turns while on slopes, only mow across
slopes less than 15 degrees, keep a safe
distance from water, an d do not mow up
and down slopes.
6. Cutting/dismemberment hazard of hand or
foot, mower blade – stay away from
moving parts.
7. Crushing/dismemberment hazard of
bysta nders, reversin g;– do not carry
passengers, look behind and down when
reversing.
PART NO. 109-6013
LOCATION: Middle of Footrest
PART NO. 109-6016
LOCATION: Near LH Mo tion Control Lever
A. Read the instructions
before servicing or
performing
maintenance.
B. Time interval.
C. Check oil level.
D. Refer to Operator’s
Manual for grease
instructions.
E. Check hydraulic oil level
and refer to Operator’s
manual for further
instructions.
F. Check tire pressure.

Table of Contents

Related product manuals