Exmark Radius X Series User Manual

Maintenance
g038074
Figure39
Note:Ensuretheoilltergaskettouchesthe
engine,thenanextra3/4turniscompleted.
Note:Disposeoftheusedoilatarecycling
center.
6.Slowlypourapproximately80%ofthespecied
oilintothellertube—useoilrecommendedin
theCheckingtheEngineOilsection.
g027517
Figure40
7.Checktheoillevel;refertoCheckingthe
EngineOilsection.
8.Starttheengineandcheckforleaks.
ServicingtheSparkPlug
ServiceInterval:Every200hours—Check
thesparkplug(Kohler
engine).
Every500hours—Replace
thesparkplug(Kohler
engine).
Ensurethattheairgapbetweenthecenterandside
electrodesiscorrectbeforeinstallingthesparkplug.
Useasparkplugwrenchforremovingandinstalling
thesparkplugandagappingtoolorfeelergaugeto
checkandadjusttheairgap.Installanewsparkplug
ifnecessary.
ThesparkplugisRFIcompliant.Equivalentalternate
brandplugscanalsobeused.
Type:ChampionXC12YCorequivalent
AirGap:0.030inch(.76mm)
47

Exmark Radius X Series Specifications

General

Engine Brand	Kawasaki
Deck Construction	Fabricated
Deck Material	10-gauge steel
Engine Type	V-Twin
Drive Type	Rear-wheel drive
Turning Radius	Zero-turn
Cutting Width	60 inches
Transmission	Hydro-Gear ZT3400
Spindle Type	Aluminum
Speed	Up to 10 mph