To Next PageTo Next PageWhy is my EXPERT GRILL Grill producing excess smoke?
If your EXPERT GRILL Grill is producing excess or discolored smoke, it could be due to a few reasons. Check and clean the interior grilling area to remove any excess grease build-up. If the pellets are wet, clear the hopper and fire pot and replace them with fresh, dry pellets. Also, check for and remove any excess pellets in the hopper.
How to fix EXPERT GRILL Atlas XG1136224169003 Grill PID screen not turning on?
If the PID screen on your EXPERT GRILL Grill isn't turning on, first, make sure the grill is properly plugged into a working GFCI outlet and that all wire connections are firmly connected. If that doesn't solve it, the circuit board fuse may have tripped and need manual replacement. Also, ensure the GFCI outlet provides a minimum 10 Amp service and that all wire connections are dry.
What to do if my EXPERT GRILL Atlas XG1136224169003 Grill shows 'ErL'?
If your EXPERT GRILL Grill is showing 'ErL', it indicates insufficient or poor pellets. First, check the fire pot for ash build-up and obstructions, ensuring it's correctly seated in the firebox. Verify the igniter is heating up and positioned correctly, and confirm the fans are working at the proper speed. Make sure the hopper has enough standard pellets. You can also press 'Prime' or manually add a small amount of pellets to the fire pot.
What does “ErH” mean on my EXPERT GRILL Atlas XG1136224169003 and how to fix it?
If your EXPERT GRILL Grill displays 'ErH', it means the grill has overheated, possibly due to a grease fire or too many pellets. To resolve this, turn off the grill and let it cool down completely. After it has cooled, thoroughly clean the grill's interior and remove any excess pellets.
Why does my EXPERT GRILL Atlas XG1136224169003 have frequent flare-ups?
Frequent flare-ups in your EXPERT GRILL Grill can be due to a couple of reasons. One cause could be that the cooking temperature is too high; try setting it lower, especially when cooking greasy foods, keeping it under 350°F. Another common reason is excess grease build-up. To address this, regularly check and clean the interior grilling area. It's a good idea to do a controlled burn-off of any hidden excess grease after cooking greasy foods.
How to troubleshoot an igniter that doesn't work on EXPERT GRILL Grill?
If the igniter on your EXPERT GRILL Grill isn't working, start by checking the fire pot for ash build-up and obstructions, ensuring it's properly seated in the firebox to allow sufficient airflow. Also, confirm the igniter rod gets hot (but DO NOT TOUCH it or the housing to avoid burns). Check the igniter rod's placement relative to the fire pot. Turn off the power, remove the hopper's baseboard, and ensure the wire connectors are tight.
Why does my EXPERT GRILL Atlas XG1136224169003 show 32°F on P1 or P2?
If your EXPERT GRILL Grill displays 'P1' or 'P2' temperature as 32°F without changing after heating, it could be due to a dirty meat probe. Try cleaning the meat probe with a soft cloth or mild abrasive sponge, along with hot water and soap. Alternatively, the meat probe wire may be wet. Open the hopper cap, remove the meat probe, and use a hair dryer to dry the wires.
What to do if EXPERT GRILL Atlas XG1136224169003 shows '“Err”' and Auger icon is flashing?
If your EXPERT GRILL Grill displays '“Err”' and the Auger icon is flashing, it indicates an issue with the auger. Ensure the auger wire is correctly connected to the PID screen. Check the wire connections and replace the auger if there is any damage.
What to do if EXPERT GRILL Atlas XG1136224169003 shows '“Err”' and Igniter icon is flashing?
If your EXPERT GRILL Grill displays '“Err”' and the Igniter icon is flashing, it indicates an issue with the igniter. Ensure the igniter wire is correctly connected to the PID screen. Check the wire connections and replace the igniter if there is any damage.
What to do if EXPERT GRILL Grill shows '“Err”' and Fan icon is flashing?
General| Brand | EXPERT GRILL |
|---|---|
| Model | Atlas XG1136224169003 |
| Category | Grill |
| Language | English |
Essential safety precautions regarding fire, burns, and carbon monoxide hazards.
Guidelines for safe electrical grounding, clearances, and installation.
Detailed parts diagram and list for identifying grill components.
Comprehensive guide for assembling the grill, including hardware and tools.
Instructions for grill placement, pellet requirements, and startup ignition.
Explains button functions, temperature settings, and various cooking modes.
Procedures for cleaning ashes, pellet hopper, and general grill upkeep.
Solutions for common operational issues, error indicators, and troubleshooting tips.
Guidance on connecting and utilizing the Expert Grill mobile application.
Overview of electrical specs, probe type, and warranty coverage.
