5.
Water is refi lled automatically.
Indicates pressure in the interior of the boiler
Pressure-Temperature Relationship
6. Refi lling water in the boiler MONROC
7. Pressure gauge MONROC
8. Start up MONROC
Temperature (ºC)
125
120
115
110
0,6 0,7 0,8 0,9 1 1,1
Pressure bars
1. Open the water screw valve external to the machine.
2. Connect the general switch, see (8) Fig. 1-.
3. Open the steam tap until steam is emitted.
”The red pilot light, see (6) Fig.1,- shows that the machine is heating up.
When it goes out, the machine has reached its ideal temperature”.
4. Connect the dispensing button, see (4) Fig. 1, or the control panel, see (5) Fig. 1 ,until
the water is issuing continuously for each dispensing unit, see (10) Fig. 1.
To Next Page
Loading...
