What to do if my Expobar G-10 does not start up?
If your Expobar Coffee Maker doesn't start, there are a few things to check. First, make sure the plug is fully inserted into the power socket and that the socket is working. Also, verify that the circuit breaker and/or differential are connected. If the cable or plug is damaged, it will need to be replaced by qualified service personnel.
Why is coffee dispensing very slow in my Expobar Coffee Maker?
If the coffee dispensing from your Expobar Coffee Maker is very slow, the coffee grinding might be too fine. Try adjusting the coffee-grinding setting to a coarser grind.
How to fix an Expobar G-10 steam wand that does not dispense steam?
If the steam wand on your Expobar Coffee Maker isn't dispensing steam, it's likely clogged with milk. Clean the wand thoroughly. If the clog persists, remove the nozzle and use a pin or needle to carefully unclog it.
Why is coffee dispensing very fast from my Expobar Coffee Maker?
If the coffee dispensing from your Expobar Coffee Maker is very fast, it may be due to the coffee grinding being too coarse. Adjust the coffee-grinding setting to a finer grind.
What to do if water is found underneath my Expobar G-10 Coffee Maker?
If you find water underneath your Expobar Coffee Maker, the drainage tube is probably blocked. You should clean the drainage tube to resolve this issue.
Why is coffee dispensing so slow on my Expobar G-10?
If coffee dispensing is very slow on your Expobar Coffee Maker, the coffee grinding may be too fine. Adjust the coffee-grinding setting to a coarser grind.
How to fix fast coffee dispensing on my Expobar G-10 Coffee Maker?
If coffee is dispensing too quickly from your Expobar Coffee Maker, it's likely that the coffee grinding is too coarse. Try adjusting the coffee-grinding setting to a finer grind.
What to do if I find water underneath my Expobar Coffee Maker?
If you find water underneath your Expobar Coffee Maker, the drainage tube is likely blocked. Clean the drainage tube to resolve this issue.
General| Brand | Expobar |
|---|---|
| Model | G-10 |
| Category | Coffee Maker |
| Language | English |
Explains different hazard levels (DANGER, WARNING, IMPORTANT) for safety. (0.85)
Welcomes the user and stresses the importance of reading the manual. (0.30)
Safety and operational guidelines for installation, use, and maintenance. (0.80)
Manufacturer's disclaimer for damage due to not following instructions. (0.90)
Safety measures before maintenance, handling liquids, and operating the machine. (0.85)
Defines the machine's purpose and its appropriate user. (0.60)
Technical data and accessories for G-10 MINI CONTROL models. (0.80)
Technical data and accessories for G-10 DISPLAY CONTROL 2GR models. (0.80)
Technical data and accessories for G-10 DISPLAY CONTROL 3GR models. (0.80)
Identifies and labels main components on the front view of the MINI CONTROL. (0.80)
Identifies and labels main components on the front view of the DISPLAY CONTROL 2GR. (0.80)
Identifies and labels main components on the front view of the DISPLAY CONTROL 3GR. (0.80)
Provides dimension sketches and a table for G-10 MINI CONTROL models. (0.75)
Provides dimension sketches and a table for G-10 DISPLAY CONTROL 2GR models. (0.75)
Provides dimension sketches and a table for G-10 DISPLAY CONTROL 3GR models. (0.75)
Covers machine shipping, packaging, delivery checks, and handling. (0.55)
Guidance on placing the machine for optimal operation and ventilation. (0.75)
Explains electrical connection procedures, warnings, and shows wiring diagrams. (0.85)
Details water connection, hardness, and pressure/temperature relationships. (0.85)
Step-by-step guide on how to safely start the coffee machine. (0.80)
Identifies porta-filter components and provides instructions for insertion. (0.70)
Step-by-step guide on how to brew espresso, including important warnings. (0.95)
Detailed instructions for steaming and frothing milk with safety warnings. (0.95)
Instructions on how to dispense hot water safely from the machine. (0.85)
General notes, daily, and weekly cleaning tasks for the machine. (0.75)
Detailed cleaning for brewing group, porta-filter, gasket, and shower plate. (0.85)
Advises on handling, storage, and proper machine disposal procedures. (0.40)
Introduces panel functions, button layout, and special button-activated functions. (0.80)
Step-by-step guide on programming custom coffee dosages for drink buttons. (0.85)
Explains the three operational statuses: On, Stand-by (OFF), and Off. (0.55)
Describes accessing menus, setting clock, Auto On/Off, and counters. (0.65)
Explains faults related to the flow meter and unconnected temperature probes. (0.80)
Describes time-out, service, and filter change alarms and their resolution. (0.85)
Addresses problems like machine not starting or steam wand issues. (0.95)
Explains causes and solutions for water leaks and limescale related problems. (0.95)
Addresses issues related to coffee grinding fineness affecting dispensing speed. (0.85)
Advises users to contact their supplier or dealer for technical support. (0.50)
To Next Page
