29
G-10
R
PROGRAMMING USING THE DISPLAY
Machine status
Machines equipped with a display include the following additional functions:
Automatic daily on/off timer (stand-by function).
Clock settings (current time and date).
Promotional display.
Number of coffees/infusions dispensed.
Digital boiler-temperature display and control.
PID-technology boiler-temperature control.
Programming and settings help system.
Visual water-softener regeneration alarm.
Display language selector.
STAND-BY (OFF)
Programming
Continuous Dispensing
Hot water / Automatic steam
(if enabled)
ON
+ - OK
Fig. 04
OFF hh:mm
Fig. 05
The coffee machine has 3 possible statuses:
On:
The machine is operational and ready to make coffee. This is the usual machine
status after turning on the power switch (see g. 04).
Stand-by:
The power switch is on, but the display shows "OFF" (see g. 05). This means that
the machine is in energy-saving mode. This mode is only entered whilst the
machine is on. To enter this mode, press the Continuous Dispensing button
and, without releasing it, simultaneously press the 2 Short Espressos button
.
To exit this mode and turn the machine back on, press the 2 Short Espressos
button
again.
Off:
The coffee machine is turned off at the power switch.
XXX ºC hh:mm
SELECT DOSES
To Next Page
Loading...
Need help?
General
