Expobar G-10 User Manual

31
G-10
R
PROGRAMMING USING THE DISPLAY
Auto On/Off
Counters
After accepting the changes made in the "Set clock" menu, pressing the 2 Short
Espressos button
accesses the coffee machine's Auto On/Off programming
menu (see fig. 09).
To change the Auto On/Off time, increase/decrease the values (hours) using the
1 Short Espresso
and 1 Long Espresso buttons whilst the values are
flashing. When the desired value is reached, press the 2 Short Espressos button
to accept it. Set the values for the minutes in the same way
(
, and ).
Auto On/Off
ON: hh:mm
Fig. 09
To access the counters menu, go to the start of the second menu level (see g. 07).
Briey press the Continuous Dispensing button to display the "Counters"
option (see g. 12).
The machine has the following 4 counters:
Litres: Volume of water dispensed by the machine (indicator used for descaler
maintenance cycles).
Service: Number of coffees dispensed (indicator used for servicing).
Number of coffees/infusions dispensed.
Number of coffees dispensed per button.
Counters
Fig. 12
Auto On/Off
OFF: hh:mm
Fig. 10
Closed On
Day
Fig. 11
Note:
By default, this setting is set as: On: --------- (indicating that the function is disabled).
Changing the value to anything other than --------- enables the function. To leave this function
disabled, press the 2 Short Espressos button
whilst the value selected is ---------.
Note:
By default, this setting is set as: On: - - : - - (indicating that the function is disabled).
Changing the value to anything other than - - : - - enables the function. To leave this function disabled,
press the 2 Short Espressos button
whilst the value selected is - - : - -.
Whilst the Auto Off time is flashing, increase/decrease the values by pressing the 1
Short Espresso
and 1 Long Espresso buttons. When the desired value is
reached, press the 2 Short Espressos button
to accept it.
The minutes values will start flashing. Set these values in the same way as described
above (
, , and ). After accepting the time, the next menu will be
displayed.
If Auto On/Off is enabled, it will also be possible to set a day on which the machine
will not be turned on automatically. This option will not be displayed if Auto On/Off
is disabled.
To set the day off (see fig. 11), increase/decrease the values by pressing the 1 Short
Espresso
and 1 Long Espresso buttons.
When the desired value is reached, press the 2 Short Espressos button
to
accept it.
i
i

Expobar G-10 Specifications

General

Brand	Expobar
Model	G-10
Category	Coffee Maker
Language	English