What to do if my Expobar New Elegance 1GR Coffee Maker does not start up?
If your Expobar Coffee Maker doesn't start, first ensure the plug is correctly inserted into a working power socket. Next, check that the circuit breaker and/or differential are connected. If the issue persists, the cable or plug may be damaged, and you should call service personnel to replace them.
Why is coffee dispensing so slow on my Expobar Coffee Maker?
If the coffee dispensing from your Expobar Coffee Maker is very slow, it's likely that the coffee grinding is too fine. Adjust the coffee-grinding setting to a coarser level.
How to fix fast coffee dispensing on Expobar New Elegance 1GR Coffee Maker?
If coffee dispensing from your Expobar Coffee Maker is happening too quickly, the coffee grinding is probably too coarse. You should adjust the coffee-grinding setting to a finer level.
What to do if there's water under my Expobar New Elegance 1GR?
If you find water underneath your Expobar Coffee Maker, it's likely that the drainage tube is blocked. You should clean the drainage tube to resolve this issue.
Why is the steam wand not working on my Expobar New Elegance 1GR Coffee Maker?
If the steam wand on your Expobar Coffee Maker isn't dispensing steam, it's probably clogged by milk. Clean the wand. If necessary, remove the nozzle and unclog it using a pin or needle.
General| Brand | Expobar |
|---|---|
| Model | New Elegance 1GR |
| Category | Coffee Maker |
| Language | English |
Defines risk levels for DANGER, WARNING, IMPORTANT, and NOTE signals for user safety.
Welcomes the user and emphasizes reading the manual for safe and intended use.
Provides guidelines for safe installation, use, and maintenance by qualified personnel.
Lists critical safety precautions for machine installation and operation to prevent injury.
Details safety measures to avoid injury and machine damage during operation and maintenance.
Specifies the machine's purpose and limitations for preparing coffee and hot drinks.
Lists technical details and accessories for the IGR model.
Details technical specifications and accessories for the Control 2GR model.
Provides technical specifications and accessories for the Display Control models.
Illustrates and labels the components of the MINI Control IGR model.
Illustrates and labels the components of the MINI Pulser 2GR model.
Shows and labels components of the MINI Control IGR with Grinder.
Illustrates and labels the components of the Control 2GR model.
Shows and labels components of the Control 2GR with Grinder model.
Illustrates and labels the components of the Control 3GR model.
Provides dimensional drawings for the MINI IGR models.
Shows dimensional drawings for the MINI IGR with Grinder model.
Provides dimensional drawings for the 2GR with Grinder models.
Details packaging, shipping symbols, and inspection procedures upon delivery.
Guidelines for placing the machine to ensure proper operation and ventilation.
Instructions for safe and correct connection to the power supply.
Diagrams showing different electrical connection configurations for various models.
Procedures for connecting the machine to the domestic water supply.
Explains boiler pressure control and its relation to water temperature.
Step-by-step guide to powering on and preparing the espresso machine.
Identifies porta-filter components and demonstrates correct insertion.
Step-by-step instructions for preparing espresso using the machine.
Guide to using the steam wand for frothing milk with safety warnings.
Instructions for dispensing hot water, including safety precautions.
General advice and warnings for cleaning the machine's exterior and internal parts.
Daily tasks to maintain the water system and machine cleanliness.
Recommended weekly cleaning procedures for brewing groups and porta-filters.
Detailed steps for the auto-cleaning program for groups and porta-filters.
Procedures for cleaning the group gasket and shower plate to remove coffee residue.
Tips for machine handling, long-term storage, and disposal.
Explains additional functions controlled by the machine's buttons.
Describes how to activate special features using button combinations.
Steps to set or reprogram specific coffee brew volumes for each button.
Instructions for setting the desired temperature for the turbo steamer.
Explains the different operational statuses (On, Stand-by, Off) of the machine display.
How to navigate to advanced settings and programming menus.
Guide to adjusting the machine's internal clock and date settings.
How to program automatic start and stop times for the machine.
Information on accessing and understanding machine usage counters.
To Next Page