What to do if my Expobar New Elegance Control 2GR does not start up?
If your Expobar Coffee Maker doesn't start, first ensure the plug is correctly inserted into a working power socket. Next, check that the circuit breaker and/or differential are connected. If the issue persists, the cable or plug may be damaged, and you should call service personnel to replace them.
Why is coffee dispensing so slow on my Expobar New Elegance Control 2GR?
If the coffee dispensing from your Expobar Coffee Maker is very slow, it's likely that the coffee grinding is too fine. Adjust the coffee-grinding setting to a coarser level.
How to fix fast coffee dispensing on Expobar Coffee Maker?
If coffee dispensing from your Expobar Coffee Maker is happening too quickly, the coffee grinding is probably too coarse. You should adjust the coffee-grinding setting to a finer level.
What to do if there's water under my Expobar New Elegance Control 2GR Coffee Maker?
If you find water underneath your Expobar Coffee Maker, it's likely that the drainage tube is blocked. You should clean the drainage tube to resolve this issue.
Why is the steam wand not working on my Expobar New Elegance Control 2GR?
If the steam wand on your Expobar Coffee Maker isn't dispensing steam, it's probably clogged by milk. Clean the wand. If necessary, remove the nozzle and unclog it using a pin or needle.
General| Brand | Expobar |
|---|---|
| Model | New Elegance Control 2GR |
| Category | Coffee Maker |
| Language | English |
Lists critical safety precautions for installation and operation.
Details essential safety measures to prevent injury, electric shock, and damage.
Details safe electrical connection and illustrates wiring types for the machine.
Covers water supply, pressure/temp, and initial machine startup procedures.
Step-by-step guide for brewing espresso using the machine.
Instructions for steaming and frothing milk with the turbo steamer.
Guide on how to dispense hot water from the machine safely.
Detailed steps for cleaning the brewing group and porta-filter.
Procedure for cleaning the group gasket and shower plate to remove residue.
Steps to program coffee dosages and set the turbo steamer temperature.
Provides solutions for common issues like startup, steam, water leaks, limescale, and grinding.
To Next Page
