What to do if my Expobar Coffee Maker does not start up?
If your Expobar Coffee Maker isn't starting, first ensure the plug is correctly inserted into a working power socket. Also, check that the circuit breaker and/or differential are connected and operational. If the cable and/or plug are damaged, call a service technician to replace them.
Why is my Expobar Coffee Maker dispensing coffee very slowly?
If coffee dispensing is very slow on your Expobar Coffee Maker, the coffee grind is likely too fine. Adjust the coffee-grinder to a coarser setting.
What to do if the steam wand of my Expobar Office does not dispense steam?
If the steam wand on your Expobar Coffee Maker isn't dispensing steam, it might be clogged by milk. Clean the wand, and if necessary, remove the nozzle and unclog it using a pin or needle.
Why is my Expobar Coffee Maker dispensing coffee very fast?
If coffee is dispensing very fast from your Expobar Coffee Maker, it's likely that the coffee grind is too coarse. To resolve this, adjust the coffee-grinder to a finer setting.
What to do if I find water underneath my Expobar Office?
If you find water underneath your Expobar Coffee Maker, the drainage tube is likely blocked. Clean the drainage tube to resolve this issue.
General| Brand | Expobar |
|---|---|
| Model | Office series |
| Category | Coffee Maker |
| Language | English |
Defines four notification levels: DANGER, WARNING, IMPORTANT, and NOTE.
Welcomes the user and advises reading the manual before use.
Details on installation, maintenance, authorized personnel, and modifications.
Provides safety instructions for installation, usage, and potential hazards.
Lists safety measures for maintenance, cleaning, and operation.
Specifies the machine's purpose, user type, and limitations.
Details specifications for Leva model, including steam wand, boiler, weight, and noise.
Lists and describes accessories like portafilters, baskets, hoses, and filters.
Provides specifications for Control/Pulser models with and without a grinder.
Lists accessories for Control/Pulser models, including portafilters and baskets.
Illustrates and lists components for Leva and Leva 2 boiler models.
Illustrates and lists components for Pulser and Control models.
Illustrates and lists components for Pulser with grinder and Control with grinder models.
Shows dimensional drawings and measurements for Leva and Leva 2 boiler models.
Shows dimensional drawings and measurements for Control & Pulser models.
Shows dimensional drawings and measurements for Control with grinder models.
Details how the machine is packaged for shipping and handling.
Instructions for checking the machine upon delivery for damage or missing items.
Guidance on where and how to place the machine for optimal use and ventilation.
Covers requirements and safety for connecting the machine to the power supply.
Illustrates different voltage types and their corresponding wiring configurations.
Explains how to connect the machine to the water supply and water hardness requirements.
Details the relationship between boiler pressure and temperature.
Outlines the options for connecting the machine to water sources.
Provides instructions for filling the machine's water tank with correct water type.
Details the process for models connected directly to the water supply.
Steps to follow to power on and prime the machine before first use.
Identifies the components of the portafilter and filter basket.
Step-by-step guide on how to correctly insert and lock the portafilter.
Step-by-step instructions for preparing an espresso shot.
Instructions for using the steam wand to heat and texture milk.
Guide on how to dispense hot water from the machine.
Initial checks and setup for operating the integrated coffee grinder.
Steps to grind coffee and dispense it into the portafilter.
Instructions on how to adjust the grinder for finer or coarser coffee grounds.
Procedure for recharging the water softener unit with a salt solution.
General guidelines and important notes for cleaning the machine's exterior and internal systems.
Tasks to be performed daily to maintain the machine's cleanliness and performance.
Tasks to be performed weekly for thorough cleaning of specific components.
Detailed steps for cleaning the brewing group and portafilter using a cleaning membrane.
Procedure for cleaning the group gasket and shower plate to ensure proper sealing.
Specific steps to clean coffee residue from the shower plate.
Important notes on handling cups, portafilters, and preventing damage.
Instructions for preparing and storing the machine for extended periods.
Guidelines for safely disposing of the machine at the end of its life.
Explains the functions and controls available on the electronic control panel.
Step-by-step guide to reprogram the volumetric doses for drink buttons.
Describes the normal operating display and indicators for group boiler temperature.
Instructions on how to power the thermostat and group boiler on and off.
Detailed steps for setting the desired operating temperature for the group boiler.
Procedure to restore the thermostat operating program to its original factory settings.
Explains error messages (A1, A2) related to thermostat and gauge issues.
Lists common problems, possible causes, and solutions for user-fixable issues.
To Next Page
