What to do if my Expobar Coffee Maker does not start up?
If your Expobar Coffee Maker doesn't start, first ensure the plug is correctly inserted into a working power socket. Then, check if the circuit breaker or differential has been disconnected and reconnect them if necessary. If the cable or plug is damaged, contact service personnel for a replacement.
Why is my Expobar Coffee Maker dispensing coffee too slowly?
If your Expobar Coffee Maker is dispensing coffee too slowly, the coffee grind may be too fine. Try switching to a coarser grind of espresso.
Why is my Expobar ONYX dispensing coffee too fast?
If coffee is dispensing too quickly from your Expobar Coffee Maker, the coffee grind might be too coarse. Try switching to a finer grind of espresso.
What to do if I see water underneath my Expobar ONYX Coffee Maker?
If you find water underneath your Expobar Coffee Maker, it's possible that the drainage tube is blocked with used grounds or rubbish. Clean the drainage tube to resolve this issue.
How to fix the steam wand on my Expobar ONYX if it's not dispensing steam?
If the steam wand on your Expobar Coffee Maker isn't dispensing steam, it might be clogged with dried milk. Clean the wand, and if necessary, remove the nozzle and unclog it using a pin or needle.
What to do if the coffee dispensing temperature is too cold on my Expobar ONYX Coffee Maker?
If the coffee dispensing temperature is too cold on your Expobar Coffee Maker, the heat-exchanger outlet pipes may be clogged with limescale. Turn off the machine and contact a technician for repairs.
What to do if the brewing groups do not dispense water in Expobar ONYX?
If the brewing groups on your Expobar Coffee Maker aren't dispensing water, the water system might be clogged with limescale. Turn off the machine and contact a technician to make needed repairs.
Detailed technical specifications for the ONYX 2GR MINI model.
Technical specifications for the ONYX 2GR MINI+ model.
Technical specifications for the ONYX 2GR model.
Technical specifications for the ONYX 3GR model.
Technical specifications for the ONYX Pro 2GR model.
Technical specifications for the ONYX Pro 3GR model.
Information on optimal boiler temperature range for steaming and brewing.
Steps and safety checks for connecting the machine to the power supply.
Step-by-step guide to power on and prepare the machine for first use.
Detailed steps for preparing and brewing espresso using the machine.
Instructions for steaming and frothing milk using the steam wand.
Specific instructions for steaming milk using the Turbo Steamer feature.
Steps for cleaning the machine at the end of each working day.
Tasks to perform for weekly maintenance and cleaning of the machine.
Procedure for daily flushing the ONYX machine brewing groups.
Steps for weekly cleaning of the ONYX machine using detergent.
Steps for weekly cleaning of the ONYX Pro machine using detergent.
Guide to programming custom brew dosages using the touchscreen.
Guide to adjusting boiler temperatures for brewing and steaming.
Common machine problems, possible causes, and solutions.
Troubleshooting for issues with coffee dispensing speed or quality.
Problems related to limescale buildup and their resolutions.
General| Type | Espresso Machine |
|---|---|
| Boiler Type | Heat Exchange |
| Material | Stainless Steel |
| Pump Type | Rotary |
| Group Heads | 2 |
| Voltage | 230V |
To Next Page