34
Dispensing hot water
OPERATION
WARNING!
Never place hands and ngers directly under the hot water outlet during dispensing to
avoid scalding or serious burns.
1. Place a pitcher (or other heat resistant vessel) under the hot water outlet.
2. Open the tap or press the hot water button to begin dispensing.
3. When the desired amount of hot water is dispensed, close the tap or press the hot water
button again to stop dispensing. (For ONYX Pro the dispensing will stop automatically after the
programmed dispensing time is reached, or after 30 seconds - whichever is shorter).
ONYX ONYX Pro
To Next Page
Loading...
Need help?
General
