47
USER PROGRAMMING - ONYX Pro
Setting the time, day and auto on/off functions
Adjust the time, day of the week, and automatic daily power on/off times as follows:
1. Press the Settings button for six seconds until the user programming menu appears on the
touchscreen.
2. Press the Clock button, then use the
+ and - buttons to set the current hour then press the
button to save the setting and adjust the current minute then use the + , - and buttons to
nish adjusting the time and current day of the week.
3. After the time is set use the
+ , - and buttons to set the Open/Close Time to Automatic,
then use the + , - and buttons to set the start/nish work times each day according to your
preferred work schedule. (If this function is not needed at all during the week, simply set the
Open/Close Time to OFF.)
Note:
For any day(s) that the machine will not be used, simply program the time as Auto On/Off
setting as --.-- which the machine will interpret as always off.
Pro Tip:
The Auto On/Off function is useful for programming the machine to be warmed up and ready
before the rst barista arrives at the start of each day, and saves a lot of energy by making sure
the machine is shut down automatically at the end of each day.
i
Adjusting the steam and group boiler temperatures
The main steam boiler and individual group boiler temperatures can be individually adjusted to offer
customized brewing and milk steaming/frothing.
Adjust the steam and group boilers as follows:
1. Press the Settings button for six seconds until the user programming menu appears on the
touchscreen.
2. Press the Temperature button, then use the
+ and - buttons to set the steam boiler operating
temperature then press the button to save the setting. Then use the + , - and buttons to
adjust the temperature of each group boiler.
Pro Tip:
Depending on the types/proles of coffee typically brewed, it may be useful to set each group at
a different temperature to ensure the very best avour for each espresso.
To Next Page
Loading...
Need help?
General
