39
WARNING!
Do not open the group or remove the
portalter until the cleaning has nished!
This will release steam and hot water
which could result in burns.
CLEANING AND CARE
Weekly cleaning with espresso machine detergent - ONYX Pro
1. Place the blind gasket in the emptied portalter.
Blind gasket
Pro Tip:
Run the cleaning cycle for each group
at the end of each week to thoroughly
clean the group head, shower plate and
portalter to ensure great coffee taste.
3. Enter the User Programming and select the
Automatic cleaning cycle on the touchscreen.
Automatic cleaning will start and lasts about 45
seconds.
Professional espresso
cleaning detergent
Part no: 1104162
2. Add 7-10g of espresso machine detergent to
the portalter, then lock the portalter into the
brewing group.
Blind gasket
4. After cleaning, with detergent, the group needs
to be ushed. So run the Automatic cleaning
cycle two more times to ush out any remaining
detergent. Repeat for each group, then remove
the blind gasket and store it in a safe place for
the next usage.
To Next Page
Loading...
Need help?
General
