14
EN
6. Operation Mode
Video Mode
1. Set the Operation Mode to 1. Please refer to the appendix
in this manual on how to set the modes and other settings.
2. To start recording, when camera is on and ready, press
and release the [Power/ Record Button], the camera emits
【1 Short Beep】and the [Power/ Record Light] is on in
green while recording.
3. To stop recording, during camera is recording, press and
release the [Power/ Record Button], the camera emits【2
Short Beeps】and the [Power/ Record Light] blinks in
green.
4. When microSD card capacity is full or battery is almost
empty during recording, the camera will emit【2 Short
Beeps】and stop recording, save video file, and emit【5
Short Beeps】then automatically power off.
Note1: The video files recorded in Video Mode are located in folder
“\DCIM\100EXSVP” on microSD card.
Note2: The video resolution can be changed via “VRES” setting.
Note3: The video timelapse feature in Video Mode can be achieved via
“VTLP” setting.
To Next Page