Meter Description
1. CO Sensor
2. LCD
3. Backlight/Units button
4. Power/Alarm limit button
Note: Battery compartment located
on back of meter.
LCD Display
1. Primary Display
2. MAX reading mode
3. Secondary Display
4. Unit of measure
Button Descriptions
Turn the meter on and off (short press); Select alarm
setpoint value (long press from a powered OFF state;
release the button when desired alarm limit is displayed)
Turn the backlight on and off (short press); Toggle
temperature units (long press during self-test period).
Reset Maximum CO value (long press in normal
operating mode)
To Next Page
Loading...
Need help?
General
