Do you have a question about the Extech Instruments HD450 and is the answer not in the manual?
Humidity Range | 0 to 100 %RH |
---|---|
Resolution | 0.1°F/°C; 0.1%RH; 1ft/min, 0.1m/s, 0.1km/h, 0.1MPH, 0.1 knots |
Accuracy | Air Velocity: ±3% of reading; Air Temperature: ±1.4°F/0.8°C; Humidity: ±3%RH |
Power Supply | 9V battery |
Humidity Accuracy | ±3 %RH |
Data Hold | Yes |
Min/Max | Yes |
Auto Power Off | Yes |
Sampling Rate | 1 second |
Temperature Range | -20 to 60 °C |
Display | LCD |
Air Velocity Range | 0.4 to 30 m/s |
Air Velocity Accuracy | ±3 % |
Air Temperature Range | -20 to 60 °C |
Operating Temperature | 0 to 50 °C |
Storage Temperature | -20 to 60 °C |
Identifies sensor plug, USB jack, buttons, and light sensor.
Describes the main LCD display and its segments.
Explains icons for clock, APO, battery, hold, and memory status.
Details range indicators, units, PC connection, memory numbers, and bargraph.
Details how to turn the meter on/off and manage automatic power off.
Explains changing units (Lux/Fc) and selecting measurement ranges.
Guides on sensor placement, reading display, and handling over-range conditions.
How to freeze the current LCD display value.
Capturing short-duration light flashes and identifying peak values.
Storing and viewing highest (MAX) and lowest (MIN) readings.
Setting a reference value and displaying readings relative to it.
Activating, deactivating, and conserving battery with the backlight.
Configuring time, date, and data sampling intervals.
Storing up to 99 readings manually and viewing them.
Automatic data recording and clearing the datalogger memory.
Connecting meter to PC via USB and using supplied software for data management.
Detailed ranges, resolutions, and accuracies for Lux and Foot candles.
Lists display, response, operating conditions, dimensions, and battery life.
Instructions for cleaning the meter and replacing its battery.
Guidelines for storing the meter and disposing of the device and batteries.