Need help?Do you have a question about the Extech Instruments LT40 and is the answer not in the manual?
General| Type | Light Meter |
|---|---|
| Sampling Rate | 2.5 times per second |
| Light Type | Visible light |
| Accuracy (Light) | ±5%rdg |
| Sensor | Silicon photodiode and filter |
| Display | LCD with backlight |
| Operating Temperature | 0 to 50°C (32 to 122°F) |
| Battery | 9V battery |
Procedure for measuring light intensity using the meter, including sensor positioning and display interpretation.
Information on the automatic power-down feature to conserve battery life and how to manage it.
How to switch between Lux and Foot-candle measurement units using the dedicated button.
How to record and display maximum, average, and minimum measured light values.
Function to freeze the current reading on the LCD display.
Steps to calibrate the meter using a 1000 Lux light source for accurate readings.
Procedure to perform zero adjustment on the meter, ensuring accurate baseline measurements.
Guidance for accurate measurements and general tips for using the light meter effectively.
Instructions for cleaning, storing, and replacing batteries for optimal meter performance.
Provides reference Lux and Foot-candle levels for various environments and activities.
Details the meter's spectral response curve and its deviation from luminosity standards.
To Next Page
