Need help?Do you have a question about the Extech Instruments ExStik PH100 and is the answer not in the manual?
General| pH Range | 0.00 to 14.00 pH |
|---|---|
| pH Resolution | 0.01 pH |
| pH Accuracy | ±0.01 pH |
| Display | LCD with backlight |
| Operating Temperature | 0 to 50°C (32 to 122°F) |
| Dimensions | 185 x 40 x 38mm (7.3 x 1.6 x 1.5") |
| Weight | 85g (3oz) |
| Temperature Compensation | Automatic |
| Temperature Resolution | 0.1 °C |
| Temperature Accuracy | ±0.5 °C |
| Operating Conditions | 0 to 50°C (32 to 122°F) |
Details the physical controls on the front of the ExStik™ meter.
Explains the various elements shown on the ExStik™ meter's LCD display.
Details the procedure for calibrating the pH meter using buffer solutions.
Provides steps to reset the meter if calibration fails or a -1 error occurs.
Explains how to switch between Celsius and Fahrenheit temperature displays.
Describes how to freeze the current reading and store it in memory.
Instructions for removing the reference junction from the electrode.
Steps for refilling the electrode with the supplied solution.
To Next Page
