Need help?Do you have a question about the Extech Instruments Extech 380976 and is the answer not in the manual?
General| Model | Extech 380976 |
|---|---|
| Category | Measuring Instruments |
| Type | Clamp Meter |
| Display | LCD |
| Safety Rating | CAT III 600V |
| Battery Type | 9V Battery |
| AC/DC Voltage Range | 0.1 to 600V |
| Resistance Range | 0.1 to 40MΩ |
Read safety information carefully before operation; avoid exceeding limits, use caution with exposed conductors, and follow manual instructions.
Procedure for measuring AC and DC voltages, including auto-detection and range selection.
Instructions for measuring AC current using the clamp-on jaws, including proper conductor placement.
Steps to measure single-phase power (KW, KVA, KVAR), Power Factor, and Phase Angle.
Steps for the initial power measurement between phases L1 and L2.
Steps for the subsequent power measurement between phases L3 and L2.
Steps to measure power between phase L1 and neutral in a 4-wire system.
Steps to measure power between phase L2 and neutral in a 4-wire system.
Steps to measure power between phase L3 and neutral in a 4-wire system.
Procedure for measuring resistance and checking continuity, including safety warnings.
Accuracy specifications for AC current measurements (True RMS).
Accuracy specifications for AC voltage measurements (True RMS).
To Next Page