Need help?Do you have a question about the Extech Instruments EX655 and is the answer not in the manual?
General| Type | Multimeter |
|---|---|
| Display | LCD |
| AC Voltage | 600V |
| DC Voltage | 600V |
| AC Current | 10A |
| DC Current | 10A |
| Resistance | 40MΩ |
| Capacitance | 100μF |
| Frequency | 10MHz |
| Continuity | Yes |
| Diode Test | Yes |
| Safety Category | CAT III 600V |
| Optical Resolution | 12:1 |
| Response Time | 500ms |
| Spectral Response | 8 to 14μm |
| Battery Type | 9V |
| Battery Life | 200 hours |
| Accuracy | ±0.5% |
| Resolution | 0.1mV |
| Emissivity | 0.1 to 1.0 |
Details critical warnings and cautions to prevent harm or damage during operation.
Identifies and explains the various parts and controls of the EX655 meter.
Explains the meaning of icons displayed on the EX650 meter's screen.
Explains the meaning of icons displayed on the EX655 meter's screen.
Details the functions of the meter's buttons, rotary switch, and related operations.
Instructions on powering the meter, sleep mode, and using the display backlight.
Covers data hold, test lead usage, and general voltage measurement precautions.
General guidelines and specific steps for AC, DC, and Lo Z voltage measurements.
Step-by-step guide for measuring AC/DC current using the clamp and test leads.
How to use the meter's feature to detect AC voltage without physical contact.
Procedures for measuring resistance and checking circuit continuity.
How to measure capacitance and frequency with the clamp meter.
Steps for performing diode tests and temperature measurements.
Explains Inrush Current, DCA ZERO, MAX-MIN, LPF, and Relative modes.
Detailed instructions for battery replacement and meter cleaning procedures.
Recommendations for storing the meter properly for longevity.
Detailed electrical performance, accuracy, and measurement ranges.
To Next Page