Do you have a question about the Extech Instruments HD600 and is the answer not in the manual?
Type | Anemometer |
---|---|
Temperature Range | 14°F to 140°F (-10°C to 60°C) |
Air Velocity Range | 0.4 to 30 m/s (80 to 5900 ft/min) |
Resolution | 0.1°F/°C; 0.1%RH |
Accuracy | ±3%RH |
Power Supply | 9V battery |
Functions | Air Velocity, Temperature, Humidity, Dew Point, Wet Bulb |
Sensor Type | Thermistor |
Specifies operational limits for altitude, humidity, and temperature.
Details servicing by qualified personnel and case cleaning instructions.
Identifies and describes the main parts and side panel features of the sound level meter.
Explains the meaning of various symbols shown on the meter's LCD display.
Instructions for powering the meter via battery or AC adaptor before operation.
Step-by-step guide to setting the meter's time, date, and default measurement range.
Provides essential tips for accurate noise measurement and instrument care.
Explains how to turn on, select settings, and read measurements from the meter.
Details adjusting range, frequency weighting ('A'/'C'), and response time (Fast/Slow).
Describes how to freeze the current reading on the display for later review.
Explains how to capture and display maximum and minimum measured sound levels.
Details the meter's data storage capacity and how to set recording intervals.
Provides instructions for erasing all recorded readings from the meter's memory.
Explains how to control the LCD backlight and disable the auto power-off feature.
Describes the AC and DC analog output signals and their specifications.
Step-by-step guide for calibrating the sound level meter using an external calibrator.
Instructions for replacing the battery and proper disposal of used batteries and the device.
Explains how to connect the meter to a PC for data acquisition and software use.
Details the steps for installing software and establishing communication with the meter.
Lists detailed technical specifications, standards, and operating parameters of the meter.