Need help?Do you have a question about the Extech Instruments HD700 and is the answer not in the manual?
General| Power Supply | 9V battery |
|---|---|
| Data Hold | Yes |
| Min/Max | Yes |
| Average/Current | Yes |
| Data Logging | No |
| Alarms | No |
| Resolution | 0.1°F/°C; 0.1%RH; 1ft/min; 0.1m/s |
| Display | Dual LCD |
| Units | °F/°C, ft/min, m/s |
| Operating Temperature | 0 to 50°C |
| Operating Humidity | 10 to 90% RH |
| Temperature Range | 14 to 140°F (-10 to 60°C) |
| Humidity Range | 10% to 95% RH |
| Sensor Type | Vane Anemometer, Capacitance Humidity Sensor, Thermistor Temperature Sensor |
Input port for pressure measurement.
Connection for external power supply.
Second input port for differential pressure.
Shows measurement data, units, timer, and symbols.
For data acquisition software connection.
Selects the unit of measure.
Displays differential pressure or offsets readings.
Accesses MIN/MAX/AVG recording mode.
Freezes reading or zeros the display.
Controls display backlight.
Turns the meter ON or OFF.
Location for battery.
Indicates active data transfer via USB.
Shows when the device is in differential pressure mode.
Indicates when the displayed reading is frozen.
Main area showing measured values.
Indicates when recording (MIN/MAX/AVG) is active.
Shows which recording mode is active.
Alerts when the battery power is low.
Displays the currently selected unit.
Shows the duration of an operation or recording.
How to power the device and battery status.
Manages battery conservation by auto shut-off.
To Next Page