EA80-en-GB_V3.6 11/16
5
MAX
CO
2
ppm
d-h
m:s
8
MIN
CO
2
ppm
d-h
m:s
CO
2
ppm
d-h
m:s
CO
2
Maximum and Minimum Recording Measurement
1. Press “MX/MN” button to enter the maximum /
minimum recording mode, the “MAX” icon
appears on the display. The maximum CO2
reading will be displayed and will be updated
only when a higher reading occurs.
2. Press “TIME” button to enter time display mode.
Displays 2 and 3 will indicate the time the
maximum reading occurred.
3. Press “MX/MN” button again. The “MIN” icon
will appear with the minimum value and its
stamp time.
4. Press “MX/MN” button again. The “ᇞ” icon will
appear with the current value and current time.
5. Press “MX/MN” button again cycle through the
recorded MAX, MIN and current readings.
6. Press “” button to exit this mode.
7. Press “TIME” button exit the time display
mode.
Data Hold
1. Press the H button momentarily to freeze the
displayed reading. The 'H' icon will appear on
the upper left-hand side of the display.
2. Press the H button again to return to normal
operation (the 'H' hold icon will disappear).
Backlight
1. Press the button to turn the backlight on or off.
2. The backlight will turn off automatically after 30 seconds.
SET
MAX
MIN
ALM
R
M
Err
INTV
Err
CO
2
ppm
ppm
%RH
d-h
CO
2
DEW
WET
°C°F
ppm
CO
2
m:s
8888
8888
8888
88
CAL
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
Need help?
General
