Need help?Do you have a question about the Extech Instruments EA30 and is the answer not in the manual?
General| Type | Environmental Meter |
|---|---|
| Data Hold | Yes |
| Min/Max | Yes |
| Average | Yes |
| Power Supply | 9V battery |
| Auto Power Off | Yes |
| Measurement Range (Conductivity) | 0 to 1999 µS/cm |
| Accuracy (Conductivity) | ±2% FS |
| Air Velocity Range | 0.4 to 30.0 m/s |
| Air Temperature Range | 0 to 60°C |
| Measurement Range (Illuminance) | 0 to 20000 Lux |
| Accuracy (Illuminance) | ±5%rdg |
| Resolution (Illuminance) | 1 Lux |
| Sensor Type | Thermistor |
| Display | LCD |
| Operating Temperature | 0 to 50 °C |
Instructions for powering the device on and off.
Details about the light sensor and its setup.
Steps for performing light measurements.
How to switch between Lux and Foot Candle units.
Using the Max/Min recording function.
Guidelines for cleaning and storing the meter.
Procedure for replacing the device batteries.
Information on calibration and repair options.
Reference table for light levels in various environments.
Graph showing the meter's spectral response.
To Next Page