Need help?Do you have a question about the Extech Instruments EN300 and is the answer not in the manual?
General| Model | EN300 |
|---|---|
| Category | Multimeter |
| Type | Digital |
| Display | LCD |
| Display Counts | 4000 |
| DC Current | 400µA to 10A |
| AC Current | 400µA to 10A |
| Resistance | 400Ω to 40MΩ |
| Frequency | 10Hz to 10MHz |
| Continuity | Yes |
| Diode Test | Yes |
| Data Hold | Yes |
| Relative Mode | Yes |
| Battery Type | 9V |
| Safety Rating | CAT III 600V |
| Measurement Functions | Resistance, Capacitance, Frequency, Temperature, Continuity, Diode |
| Temperature (Type K) | -40°C to 1000°C |
Outlines the five professional measuring functions and common features of the EN300 meter.
Explains safety symbols and provides essential cautions for safe operation and handling of the device.
Identifies and labels all physical parts and controls of the Extech EN300 meter.
Covers turning the meter on/off, battery replacement, and selecting measurement modes.
Guides on using the Anemometer and Thermocouple functions, including setup and notes.
Details operation for Humidity, Light, and Sound Level measurements, including calibration.
Explains Hold, Data Record, Auto Power-off, RS232 port, and battery replacement procedures.
Lists general specifications and details for the Anemometer and Thermocouple measurement functions.
Provides specifications for Humidity, Light, and Sound Level measurements, including accuracy and ranges.
To Next Page