Need help?Do you have a question about the Extech Instruments EX810 and is the answer not in the manual?
General| Max Voltage (AC/DC) | 1000V |
|---|---|
| Diode Test | Yes |
| Data Hold | Yes |
| Auto Power Off | Yes |
| Continuity | Yes |
| Auto Ranging | Yes |
| Power Supply | 9V battery |
| Type | Digital |
| Display | LCD |
| Capacitance Measurement | Yes |
| Frequency Measurement | Yes |
| Frequency Range | 10MHz |
| Weight | 350g |
Lists EX810, EX820, EX830 clamp meters and their basic functions.
Details the standard measurement functions available on all EX800 series clamp meters.
Highlights the main operational features of the EX800 series clamp meters.
Explains the meaning of standard safety symbols used with the meter.
Provides crucial safety instructions and warnings for correct meter operation.
Lists precautions to prevent damage to the meter or personal injury.
Identifies and describes the physical parts of the EX830 clamp meter.
Explains the meaning of various symbols displayed on the meter's LCD.
Details the accuracy ratings for different functions and models.
Covers clamp jaw size, display type, measurement rate, and operating environment.
Step-by-step guide for measuring AC and DC current with the clamp.
How to use the DC Zero feature for accurate DC current readings.
Instructions for performing AC and DC voltage measurements.
Procedure for measuring resistance values using the meter.
How to measure capacitance, including capacitor discharge warning.
Steps for measuring signal frequency with the clamp meter.
Guide for taking temperature readings using a Type K thermocouple.
Instructions for checking electrical continuity in circuits.
How to test diodes and semiconductor junctions.
Procedure for using the non-contact IR temperature function.
Explains how to use data hold, peak capture, and max/min recording features.
How to activate the LCD backlight and manage the auto power off feature.
Guidelines for properly cleaning and storing the clamp meter.
Step-by-step instructions for replacing the meter's battery.
Information on replacing the Type K thermocouple probe.
Details Extech's warranty terms and conditions for the instrument.
Information on obtaining calibration and repair services for the meter.
To Next Page
