Need help?Do you have a question about the Extech Instruments RPM33 and is the answer not in the manual?
General| RPM Range (Contact) | 0.5 to 19, 999 RPM |
|---|---|
| Measurement Range | 0.5 to 99, 999 RPM |
| Sampling Rate | 1 second |
| Operating Temperature | 32 to 122°F (0 to 50°C) |
| Power Source | 9V Battery |
| Type | Tachometer |
| Measurement Type | RPM |
| Accuracy | ±(0.05% of reading + 1 digit) |
| Resolution (Photo) | 0.1 RPM |
| Resolution | 0.1 RPM |
| Memory | Last reading hold |
| Display | LCD |
| Battery Type | 9V battery (included) |
| Dimensions | 6.3 x 1.5 inches |
| Resolution (Surface Speed) | 0.01 ft/min |
Lists and describes the physical components of the tachometer, including its display and buttons.
Explains the operational functions of the MEM, MEASURE, and MODE buttons.
Provides critical warnings and precautions for safe operation, including laser and moving parts hazards.
Details steps for preparing the tachometer for non-contact measurements.
Details steps for preparing the tachometer for contact measurements.
Step-by-step guide for taking measurements in non-contact mode.
Provides important tips and considerations for accurate non-contact measurements.
Step-by-step guide for taking measurements in contact mode.
Explains how to switch between Surface Speed, Length, and Revolutions modes and available units.
Details the process of starting, logging, and ending measurement sessions for data recording.
Explains how to create multiple reading sets within a single measurement session.
Lists the general technical specifications of the tachometer.
To Next Page