To Next PageTo Next Page
Need help?Do you have a question about the Extech Instruments RH390 and is the answer not in the manual?
General| Resolution (Humidity) | 0.1% RH |
|---|---|
| Data Logging | Yes |
| Datalogging Capacity | 16, 000 data points |
| Interface | USB |
| Resolution (Temperature) | 0.1°F/°C |
| Accuracy (Humidity) | ±3% RH |
| Temperature Range | -4 to 140°F (-20 to 60°C) |
| Temperature Accuracy | +/-1.8°F/1°C |
| Dew Point Range | -68 to 140°F (-20 to 60°C) |
| Wet Bulb Range | -4°F to 140°F (-20 to 60°C) |
| Display | Backlit LCD |
| Storage Conditions | -4°F to 140°F (-20°C to 60°C), <90% RH |
Details on humidity measurement range, resolution, and accuracy.
Details on temperature measurement range, resolution, and accuracy.
LCD type, response time, sensor type, Wet/Dew Point ranges.
Environmental limits for meter operation and storage.
Power supply type and approximate battery life.
Identifies the Humidity/Temp Sensor and device buttons.
Explains the meaning of icons and readings shown on the LCD.
Instructions on how to turn the device on and off.
Steps for performing general measurements and toggling display modes.
How to select and display Dew Point and Wet Bulb temperature readings.
How to freeze and release current readings on the display.
Viewing min/max readings and controlling the LCD backlight.
Explanation of the auto power off feature and how to disable it.
Guidelines for cleaning and storing the instrument.
Steps for replacing the device's battery.
Information on calibration, repair services, and contact details.
